1. Crane type: double-beam, bearing 2. Function.. - testo da correggere (modifica editoriale) dall'utente kulik-j

1. Crane type: double-beam, bearing
2. Function (underline the required): a). work specific: -special -general purpose b) work nature: -shifting -multi-purpose
3. Characteristics of the material handling operations (type of transferred load): equipment for compressor station
4. Required output___________tph___Cycle/h
5. Carrying capacity of the main lift 16T subsidiary lift (lifts)
6. Service conditions (underline the required):
U1 – exploitation outdoors at temperature from -40 up to +400C wind speed, m/s
U2 – exploitation indoors at temperature from -40 up to +400C
U3 – exploitation indoors at temperature from -10 up to +400C
7. Crane weighting mode (underline): -lightA3 –averageA5 -heavyA7 –highly heavy A8 -the mode is submitted to producer’s approval.
8. Basic parameters: crane span 16000mm; crane width________mm;
Main hoisting height 9000mm; subsidiary hoisting height_________mm.
9. Preferred control system (underline):
-frequency changer;
-relay contact system
-power controller
-thyristor control system
10. Speed and control bands for the main devices speed regulation:
Mechanism Mechanism speed m/s Main subsidiary
Lifting/sinking 0, 125
Crane travel 1
Hand truck travel 0, 5
Hand truck rotation
11. Type of current contact jaw (underline): -cable drum; -trolley open; -trolley isolated; -scalloped (flexible cable);
-another_______________
12. Type of current contact jaw: -bunch of cables -another
13. Type of crane rail (underline): P43; P50; KP70; KP80; KP100; KP120
14. Current type of circuit power supply (underline):
-alternating -direct; tension in power circuit ______W.
15. Type of control (underline):
-from the cab; -from the hanging control panel -radio control
16. Cab (underline):
-of a close type; -of a close type with air conditioner -of an open type;
-stationary, on the opposite side of the power trolleys;
-stationary, on the side of the power trolleys;
-stationary, in the centre of the crane span;
-stationary, fixed on the hand truck. –without cab
17. Type of the load handling device, applied on the crane (underline):
-hook; -clam-shell; -magnet; -spreader; -another
18. Necessity in load handling devices, delivered with crane (underline):
-clam-shell; -magnet; -spreader; -another____________________ (indicate the type) _____________________
19. Necessity in lighting (underline):
-of the work area; -emergency lighting
20. Additional safety, automation and connection devices (underline):
-with parameter registrar; -speakerphone; -radio contact; -another
21. Supplementary claims: -----------------------------------------------------
Notes:
1. Supplementary claims on the part of the Customer to the crane construction and production are to be specified in Appendix №____, which is an integral part of the contract.
2. Geometrical parameters of the crane are in the outline drawing according to Appendix №_____, which is an integral part of the contract.
3. Questionnaire is to be arranged in duplicate. Customer gets one copy, enterprise-producer (crane supplier) gets the other one.

CorrectMyText Utenza

Inglese lingua

Testo da correggere dall'utente kulik-j

Si prega di correggere i testi su inglese:

Si prega di aiutare con la traduzione: